Victron SmartSolar MPPT 150/70-Tr VE.Can
    Victron SmartSolar MPPT 150/70-Tr VE.Can
Victron SmartSolar MPPT 150/70-Tr VE.Can
Victron SmartSolar MPPT 150/70-Tr VE.Can
    Victron SmartSolar MPPT 150/70-Tr VE.Can
Victron SmartSolar MPPT 150/70-Tr VE.Can

About

Description

Victron SmartSolar MPPT 150/70-Tr VE.Can - Solar charge controller which gathers energy from your solar panels and stores it in your batteries.

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

MPPT: Ultra Fast Maximum Power Point Tracking
The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.
The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.

Control Your Charger Remotely
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

Remote Monitoring and Control
If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).
For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.

SmartSolar Control Display
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.

More information about Victron SmartSolar MPPT 150/70-Tr VE.Can:

Description

Victron SmartSolar MPPT 150/70-Tr VE.Can - Solar charge controller which gathers energy from your solar panels and stores it in your batteries.

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

MPPT: Ultra Fast Maximum Power Point Tracking
The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.
The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.

Control Your Charger Remotely
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

Remote Monitoring and Control
If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).
For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.

SmartSolar Control Display
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.

More information about Victron SmartSolar MPPT 150/70-Tr VE.Can:

Victron Energy by Victron Energy

Victron SmartSolar MPPT 150/70-Tr VE.Can

Regular price
€398,00
Sale price
€398,00
Regular price
Shipping calculated at checkout.

SKU: : SKU: SCC115070411

Worldwide Delivery Service
Worldwide Delivery Service
We deliver with DHL, FedEx, DPD, DB Schenker and Dachser
Delivery from stock
Delivery from Stock
Actual stock is always up to date online 24/7
Customer Support
Customer Support
Priority Customer Support by Email - Phone - Online Chat
Experience Experience
18+ Years Experience
Established in 2006 and we supply only high quality products
Authorized Supplier Authorized Supplier
Authorized Victron Energy Supplier
Trusted Victron Energy distributor

Delivered to more than 130 countries

Click to Check Out our Customers